Perforation Mask Disc Stock Sheet calculator.
Count supplied masking discs for circular holes, allocating square cutting cells rather than treating circular area as usable sheet yield.
Your inputs
Use measurements from your plan and properties from your chosen product. Any prefilled values are illustrative.
A clear estimate starts here.
Enter your dimensions and product details to see the quantity and purchase breakdown.
Formula and assumptions
How this calculation works.
Disc blank cell side = hole diameter + 2 × supplied margin; whole cells per sheet = floor(width/side) × floor(length/side). Does not select a coating procedure, perforation layout or masking material suitability.
A worked example
Illustrative inputs only. Product properties and design dimensions are not recommendations for your project.
- Usable masking sheet width
- 1 m
- Usable masking sheet length
- 1 m
- Supplied hole diameter
- 100 mm
- Supplied margin around each hole
- 0 mm
- Holes per panel
- 60
- Panels to mask
- 2
Masking stock sheets: 2 sheets
Square-grid cells only; circle nesting and reuse of spaces between circles are excluded.
Before you purchase
Use dimensions from your plan and properties from your chosen product. Any design spacing, section or fixing pattern must already be specified.
Does not select a coating procedure, perforation layout or masking material suitability.
All dimensions, properties and application patterns are user-supplied. No building-code default is inserted.
Method: dimensional arithmetic and user-supplied specifications. Software checks: 2026-10-06. Calculation and review policy.
Check your purchase assumptions
Connected work guides and comparisons
Explore decorative panels, fabric covers and supplied attachment counts