Specified Planter Board Cut List calculator.
Coordinate supplied wall board cuts with the inside dimensions used for fill.
Your inputs
Use measurements from your plan and properties from your chosen product. Any prefilled values are illustrative.
A clear estimate starts here.
Enter your dimensions and product details to see the quantity and purchase breakdown.
Formula and assumptions
How this calculation works.
Rounds wall courses to whole boards but uses the specified finished height for capacity. Any trimmed top course is explicit; wall construction adequacy is excluded.
A worked example
Illustrative inputs only. Product properties and design dimensions are not recommendations for your project.
- Outside length
- 2 m
- Outside width
- 1 m
- Specified wall height
- 0.5 m
- Actual board face height
- 0.2 m
- Actual wall board thickness
- 50 mm
- Identical containers
- 1
Total supplied wall-board cut length: 17.4 m
Long walls run full outside length; end boards fit between them. Open-bottom geometry; support, fixing, lining and material suitability are not specified.
Before you purchase
Use dimensions from your plan and properties from your chosen product. Any design spacing, section or fixing pattern must already be specified.
Rounds wall courses to whole boards but uses the specified finished height for capacity. Any trimmed top course is explicit; wall construction adequacy is excluded.
Dimensions, quantities, prices, timing and product properties are supplied by you. This tool does not select construction specifications or assess structural, electrical or hydraulic suitability.
Method: dimensional arithmetic and user-supplied specifications. Software checks: 2026-10-04. Calculation and review policy.