Carton sheet stock.
Use the supplied unfolded carton blank dimensions including its chosen flaps and tabs.
Read the right quantitative data
Usable sheet size, cutting gap and permitted grain direction.
Check this ordering assumption
Assembled box surface area does not necessarily equal a complete flat carton pattern.
The chosen carton construction and protective strength are outside quantity arithmetic.
A worked quantity method
This illustrative set of supplied inputs demonstrates Supplied Carton Flat Blank Sheet Order Calculator. Replace the example measurements and product figures with your own before ordering.
| Supplied input | Metric display | US display |
|---|---|---|
| Usable stock width | 1 m | 3.28 ft |
| Usable stock length | 2 m | 6.56 ft |
| Your reserved cutting gap | 0 m | 0 ft |
| Permitted blank orientation | Fixed orientation | Fixed orientation |
| Supplied glue tab extension | 0 m | 0 ft |
| Supplied extension at each flap end | 0.1 m | 0.33 ft |
| Specified carton size 1: Supplied box width | 0.2 m | 0.66 ft |
| Specified carton size 1: Supplied box length | 0.3 m | 0.98 ft |
| Specified carton size 1: Supplied side height | 0.2 m | 0.66 ft |
| Specified carton size 1: Identical cartons | 5 | 5 |
Sheets for this rectangular allocation: 1 sheets
- Cut panels
- 5
- Net panel area
- 2 m²
- Area outside panels including cutting gaps
- 0 m²
Longest-side-first placement with disjoint rectangular remainder regions and reserved cutting gaps. Feasible allocation, not a guaranteed minimum or machine cutting procedure.
Open this example in the full calculatorYour measurement and product-data sheet
Record what you know and mark verified items ready. Notes save on this browser after you edit them. Download a copy before clearing browser data.
Use the supplied unfolded carton blank dimensions including its chosen flaps and tabs.
Usable sheet size, cutting gap and permitted grain direction.
Assembled box surface area does not necessarily equal a complete flat carton pattern.
Input for Supplied Carton Flat Blank Sheet Order Calculator. Record the value with its unit and quantity basis.
Input for Supplied Carton Flat Blank Sheet Order Calculator. Record the value with its unit and quantity basis.
Input for Supplied Carton Flat Blank Sheet Order Calculator. Record the value with its unit and quantity basis.
Input for Supplied Carton Flat Blank Sheet Order Calculator. Record the value with its unit and quantity basis. Available choices: Fixed orientation; Rotation permitted
Input for Supplied Carton Flat Blank Sheet Order Calculator. Record the value with its unit and quantity basis.
Input for Supplied Carton Flat Blank Sheet Order Calculator. Record the value with its unit and quantity basis.
Input for Supplied Carton Flat Blank Sheet Order Calculator. Record the value with its unit and quantity basis.
Input for Supplied Carton Flat Blank Sheet Order Calculator. Record the value with its unit and quantity basis.
Input for Supplied Carton Flat Blank Sheet Order Calculator. Record the value with its unit and quantity basis.
Input for Supplied Carton Flat Blank Sheet Order Calculator. Record the value with its unit and quantity basis.
Choose your next calculation
Supplied Carton Flat Blank Sheet Order Calculator
Develop four supplied carton side panels, a glue tab and flap extensions into a full rectangular blank for stock allocation.
Mixed Rectangle Sheet Layout Calculator
Build a feasible rectangular cut allocation for different rectangular panels, respecting your rotation choice and cutting gap.
Turn the estimate into an order
- Confirm that all quantities use the same measured basis and the selected product's current data.
- Keep different products, finishes and handed variants in separate purchase lines.
- Review exact demand and whole-pack purchase quantities before entering your quoted prices.
- Record compatible stock already on hand, then save the remaining order in your browser project.
Measurement and purchase guides
Other materials in this family
Reviewed 6 October 2026. Geometry and purchase arithmetic use your measurements and selected specifications. Calculation scope.