Cladding course stock.
Measure course lengths by the supplied orientation and openings.
Read the right quantitative data
Useful cover width, stock length and the permitted joint locations.
Check this ordering assumption
Nominal width can overstate effective cover in an overlapping profile.
Layout, allowable joints and fixing requirements must already be specified.
A worked quantity method
This illustrative set of supplied inputs demonstrates Measured Cladding Course Stock Calculator. Replace the example measurements and product figures with your own before ordering.
| Supplied input | Metric display | US display |
|---|---|---|
| Selected stock board length | 5 m | 16.4 ft |
| Specified extra trim per course end | 0 m | 0 ft |
| Your permitted course joint plan | One continuous piece per run | One continuous piece per run |
| Course run 1: Measured full course length | 3 m | 9.84 ft |
| Course run 1: Removed course length | 0 m | 0 ft |
| Course run 1: Identical courses | 3 | 3 |
Cladding stock lengths for measured courses: 3 boards
- Measured course demand including supplied trims
- 9 m
- Separate course runs
- 3
Continuous-piece packing uses decreasing-length first fit. It is feasible for the stated pieces but is not guaranteed optimal. No cut kerf, damage or end trim is assumed; include these in your supplied piece lengths.
Open this example in the full calculatorYour measurement and product-data sheet
Record what you know and mark verified items ready. Notes save on this browser after you edit them. Download a copy before clearing browser data.
Measure course lengths by the supplied orientation and openings.
Useful cover width, stock length and the permitted joint locations.
Nominal width can overstate effective cover in an overlapping profile.
Input for Measured Cladding Course Stock Calculator. Record the value with its unit and quantity basis.
Input for Measured Cladding Course Stock Calculator. Record the value with its unit and quantity basis.
Input for Measured Cladding Course Stock Calculator. Record the value with its unit and quantity basis. Available choices: One continuous piece per run; Unrestricted joining and pooling permitted
Input for Measured Cladding Course Stock Calculator. Record the value with its unit and quantity basis.
Input for Measured Cladding Course Stock Calculator. Record the value with its unit and quantity basis.
Input for Measured Cladding Course Stock Calculator. Record the value with its unit and quantity basis.
Choose your next calculation
Measured Cladding Course Stock Calculator
Count cladding stock from individually measured course runs and exclusions, with explicit end-joint and reuse assumptions.
Overlapped Panel Coverage Calculator
Calculate the finished width covered by a known number of overlapping panels.
Turn the estimate into an order
- Confirm that all quantities use the same measured basis and the selected product's current data.
- Keep different products, finishes and handed variants in separate purchase lines.
- Review exact demand and whole-pack purchase quantities before entering your quoted prices.
- Record compatible stock already on hand, then save the remaining order in your browser project.
Measurement and purchase guides
Other materials in this family
Reviewed 6 October 2026. Geometry and purchase arithmetic use your measurements and selected specifications. Calculation scope.