Render bead stock.
List all supplied continuous corner, stop and reveal bead runs.
Read the right quantitative data
Stock length and whether a particular run may be joined.
Check this ordering assumption
A continuous corner longer than one stock piece cannot be solved by total length alone.
The page does not select bead type, joint permission or render detail.
A worked quantity method
This illustrative set of supplied inputs demonstrates Render Bead Continuous Cut Order Calculator. Replace the example measurements and product figures with your own before ordering.
| Supplied input | Metric display | US display |
|---|---|---|
| Selected bead stock length | 3 m | 9.84 ft |
| Extra cutting and end allowance per piece | 0 m | 0 ft |
| Continuous bead run 1: Measured run length | 2 m | 6.56 ft |
| Continuous bead run 1: Identical runs | 2 | 2 |
| Continuous bead run 2: Measured run length | 1 m | 3.28 ft |
| Continuous bead run 2: Identical runs | 2 | 2 |
Render trim stock lengths: 2 lengths
- Required trim pieces
- 4
- Total cut length
- 6 m
Continuous-piece packing uses decreasing-length first fit. It is feasible for the stated pieces but is not guaranteed optimal. No cut kerf, damage or end trim is assumed; include these in your supplied piece lengths. Each run uses one continuous piece; bead profile and corner detail must already be chosen.
Open this example in the full calculatorYour measurement and product-data sheet
Record what you know and mark verified items ready. Notes save on this browser after you edit them. Download a copy before clearing browser data.
List all supplied continuous corner, stop and reveal bead runs.
Stock length and whether a particular run may be joined.
A continuous corner longer than one stock piece cannot be solved by total length alone.
Input for Render Bead Continuous Cut Order Calculator. Record the value with its unit and quantity basis.
Input for Render Bead Continuous Cut Order Calculator. Record the value with its unit and quantity basis.
Input for Render Bead Continuous Cut Order Calculator. Record the value with its unit and quantity basis.
Input for Render Bead Continuous Cut Order Calculator. Record the value with its unit and quantity basis.
Choose your next calculation
Render Bead Continuous Cut Order Calculator
Fit complete measured bead runs into selected stock lengths, keeping each continuous run unspliced.
Corner Bead Piece Calculator
Count full-length corner beads by individual corner heights while showing unusable cut length.
Turn the estimate into an order
- Confirm that all quantities use the same measured basis and the selected product's current data.
- Keep different products, finishes and handed variants in separate purchase lines.
- Review exact demand and whole-pack purchase quantities before entering your quoted prices.
- Record compatible stock already on hand, then save the remaining order in your browser project.
Measurement and purchase guides
Other materials in this family
Reviewed 6 October 2026. Geometry and purchase arithmetic use your measurements and selected specifications. Calculation scope.