MetandumFREE TOOLS. NO SUBSCRIPTION.Find a calculator ⌕My projects
All comparisons

Face-only fabric reference versus complete wrap blanks.

Side depth and back returns consume fabric beyond the visible face, and full blank width can determine stock count.

Calculate two independent purchase scenarios

Prefilled values are illustrative. Replace measurements and product data on both sides. Quantities with different units or different products cannot be combined. Open a result in its calculator to save it to your material project.

Face-only reference, not a complete wrap

Fabric Covered Panel Wrap Blank Calculator

Where to get this value

Measure this dimension in your plan or on site and use the displayed unit. For irregular shapes, divide the geometry into the supported sections.

Where to get this value

Measure this dimension in your plan or on site and use the displayed unit. For irregular shapes, divide the geometry into the supported sections.

Measured item 1
Where to get this value

Measure this dimension in your plan or on site and use the displayed unit. For irregular shapes, divide the geometry into the supported sections.

Where to get this value

Measure this dimension in your plan or on site and use the displayed unit. For irregular shapes, divide the geometry into the supported sections.

Where to get this value

Measure this dimension in your plan or on site and use the displayed unit. For irregular shapes, divide the geometry into the supported sections.

Full supplied side and back wrap

Fabric Covered Panel Wrap Blank Calculator

Where to get this value

Measure this dimension in your plan or on site and use the displayed unit. For irregular shapes, divide the geometry into the supported sections.

Where to get this value

Measure this dimension in your plan or on site and use the displayed unit. For irregular shapes, divide the geometry into the supported sections.

Measured item 1
Where to get this value

Measure this dimension in your plan or on site and use the displayed unit. For irregular shapes, divide the geometry into the supported sections.

Where to get this value

Measure this dimension in your plan or on site and use the displayed unit. For irregular shapes, divide the geometry into the supported sections.

Where to get this value

Measure this dimension in your plan or on site and use the displayed unit. For irregular shapes, divide the geometry into the supported sections.

A worked purchase comparison

Four 0.4 × 0.4 m face-only reference blanks fit one 1 × 2 m stock piece. Adding 0.05 m panel depth and 0.05 m back return at each edge gives 0.6 × 0.6 m complete blanks. Three fit along that stock length and only one across its width, requiring two stock pieces for four panels.

Use your measurements and selected products

Use supplied panel sizes, fabric stock, mask blank dimensions and an already specified attachment pattern. The calculator does not choose acoustic or fire performance.

Decorative Full Slat Face Stock Calculator

Count whole-width supplied decorative face strips that fit across measured rectangles and preserve complete vertical cut fit.

Measured Perforated Panel Open Area Calculator

Compare supplied non-overlapping circular perforations with gross panel area and retained material mass.

Fabric Covered Panel Wrap Blank Calculator

Develop a supplied panel face, side depth and back return into a whole fabric blank before stock allocation.

Specified Baffle Faces Coating Quantity Calculator

Count selected broad faces, narrow faces and ends of supplied rectangular baffles before ordering coating.

Supplied Fabric Frame Staple Position Pack Calculator

Count perimeter positions on supplied rectangular frames with corners counted once and your chosen staples per position.

Perforation Mask Disc Stock Sheet Calculator

Count supplied masking discs for circular holes, allocating square cutting cells rather than treating circular area as usable sheet yield.

What makes the comparison valid?

Face-only quantities omit the supplied wrap pattern. Perforation percentage is geometry, not sound absorption, ventilation capacity, fire performance or strength.

Illustrative quantities above are not market prices or construction recommendations. Compare actual permitted scenarios independently and keep alternative orders separate.

Next steps

Manufacturer reference for product data

Reviewed 5 October 2026. Search demand has not been measured.