MetandumFREE TOOLS. NO SUBSCRIPTION.Find a calculator My projects
CHECK THE ASSUMPTIONS

Material and garden planning guides.

Search measurements, material comparisons, routine-care records and plant profiles. Each guide states its sources, assumptions and matching calculators.

7722 GUIDES

Plan by work type: measurements, calculators and comparisons

Plant profiles: 34 grouped guides

Browse every article in the paginated archive

Browse all article archive pages

24 guides

Loading guides…

Casting

How to measure and order: casting shells, mould cavities and mixed-material packages

Which measurements and product data prevent quantity mistakes for this job?

Read guide
Casting

Small versus large mixed-yield packages for the same shell: quantity checks

The same shell needs different package counts when supplied mixed yields differ. The count does not establish a suitable casting compound or a cheaper order.

Read guide
Painting

How to measure and order: figured frame and decorative face coating quantities

Which measurements and product data prevent quantity mistakes for this job?

Read guide
Painting

Equal outer ellipse dimensions with different inner openings: quantity checks

Identical outside dimensions do not imply equal coated frame area. A smaller opening retains more face area and can change whole-container rounding.

Read guide
Pipes

How to measure and order: pipe stock and supplied fitting quantities

Which measurements and product data prevent quantity mistakes for this job?

Read guide
Pipes

Short versus long stock for the same pipe cuts: quantity checks

Equal total cut metres can require different stock counts because a continuous cut cannot be assembled from leftover ends.

Read guide
Ducts

How to measure and order: duct shell sheets and measured coating faces

Which measurements and product data prevent quantity mistakes for this job?

Read guide
Ducts

Zero-seam reference versus supplied seam blank fit: quantity checks

Seam extensions can change whole blank fit even when the added net area seems small. Pure surface area is not a complete cutting order.

Read guide
Acoustics

How to measure and order: decorative panels, fabric covers and supplied attachment counts

Which measurements and product data prevent quantity mistakes for this job?

Read guide
Acoustics

Face-only fabric reference versus complete wrap blanks: quantity checks

Side depth and back returns consume fabric beyond the visible face, and full blank width can determine stock count.

Read guide
Packaging

How to measure and order: packing blanks, wrap and protection consumables

Which measurements and product data prevent quantity mistakes for this job?

Read guide
Packaging

Short versus long film rolls for continuous load wraps: quantity checks

The same total geometric path may need more rolls when each complete load wrap must stay continuous.

Read guide
Lumber

How to measure and order: furniture hardware packs and supplied panel details

Which measurements and product data prevent quantity mistakes for this job?

Read guide
Lumber

Complete slide pair packs versus individual rail packs: quantity checks

A pack count is meaningless until its unit basis is known. One pair contains two matching rails; one individual rail is not a complete pair.

Read guide
Finishing

How to measure and order: tablecloth, pillow and cushion cut orders

Which measurements and product data prevent quantity mistakes for this job?

Read guide
Finishing

Narrow versus wide stock for whole circular tablecloth blanks: quantity checks

A circular finished shape still needs its full source blank under the stated square-blank cutting method; area alone cannot establish fit.

Read guide
Painting

How to measure and order: surface preparation consumables

Which measurements and product data prevent quantity mistakes for this job?

Read guide
Painting

Separate abrasive zones versus one pooled working area: quantity checks

A partially used abrasive sheet may be stranded in one work zone. Pooling area assumes its remaining usable life can transfer to another zone.

Read guide
Flooring

How to measure and order: tile and floor accessories

Which measurements and product data prevent quantity mistakes for this job?

Read guide
Flooring

Small versus large packs for a supplied clip layout: quantity checks

The same internal-edge count can produce a different number of packs and different surplus quantities. Pack count alone does not establish the cheaper order.

Read guide
Landscaping

How to measure and order: planting quantities and top-ups

Which measurements and product data prevent quantity mistakes for this job?

Read guide
Landscaping

Empty pot capacity versus fill around a root ball: quantity checks

Container capacity is larger than the amount of new mix needed when an existing root ball occupies part of the vessel.

Read guide
Insulation

How to measure and order: insulation material orders

Which measurements and product data prevent quantity mistakes for this job?

Read guide
Insulation

Area coverage versus whole batts cut for bays: quantity checks

Area packs pool coverage; bay cuts preserve the number of whole pieces needed inside every bay.

Read guide